Factory Supply TS Double Layer Nylon66 Membrane Pleated Filter Cartridge for Pharmaceutical
“Quality initial, Honesty as base, Sincere support and mutual profit” is our idea, so as to build repeatedly and pursue the excellence for Factory Supply TS Double Layer Nylon66 Membrane Pleated Filter Cartridge for Pharmaceutical, We hope to establish far more organization associations with consumers all over the globe.
“Quality initial, Honesty as base, Sincere support and mutual profit” is our idea, so as to build repeatedly and pursue the excellence for TS high quality Nylon Pleated Filter Cartridge, Our products have enjoyed a great reputation for their good quality, competitive prices and prompt shipment in international market. Presently, we are sincerely looking forward to cooperating with more overseas customers based on mutual benefits.
◆Naturally hydrophilic Nylon 6,6 membrane for sterile filtration, absolute rating ≥99.99%
◆Chemical resistant to alkaline solutions and organic solvents, suitable for sterile filtration of those liquids
◆High low rate and cost-effective High non-specific adsorption and low extractables
◆100% integrity test
◆Replace Sartorius ,Pall or Millipore Filter is available
•Wine, beer, mineral water, pure water filtration;
•Solvents sterile filtration for analytical determination such as HPLC;
•Fine chemicals, especially ketone, ester, ether,
•Ultrapure water and disk, display, multi silicon process water in Electronics;
•Digital inks
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Hydrophilic Nylon6,6 Membrane | ||||
| Support Layers: | Polypropylene | |||||
| Micron Rating: | 0.1, 0.2, 0.45, 0.65, 1.0, 3.0, 5.0um | |||||
| Inner core: | Reinforced Polypropylene | |||||
| Outer Cage, End caps: | Reinforced Polypropylene | |||||
| Seal Method: | Thermal Bonded, No Adhesives | |||||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75”) | ||||
| Inner Diameter | 33mm(1.30”) | |||||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | |||||
| Filtration Area(m2) | 0.65 m2 per 10” | |||||
| Operating conditions | Normal Operating Temperature: | Up to 60℃ (140℉) | ||||
| Max.Operating Temperature.: | 80℃ (176℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 6-14 | |||||
| Sterilization: | Steam Sterilization for 30 minutes at 135℃(275℉), cumulative Time: 3hours, autoclave 30 minutes (optional) |
|||||
| Cartridge Safety | Endotoxin: | ＜0.25 EU/ml | ||||
| Extractables: | 0.03g / 10″ | |||||
| GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
| P - Pharmaceutical | PNN | 010-0.1μm | AA- DOE | 10-10″ | S-silicone; N-nitrile | |
| E - ELECTRONIC | 020-0.2μm | CN-226/FIN | 20-20″ | E-epdm ; T-teflon (encaptulated) | ||
| F - Food&Beverage | 045-0.45μm | BN-222/FIN | 30-30″ | V-viton | ||
| 100-1.00μm | BF-222/ FLAT SEAL | 40-40″ | How to Order?- Example | |||
| CF-226/FLAT SEAL | 05-5″ | Pharmaceutical grade; Micron:0.45um; Length:10″ ADAPTER: DOE; Gakset: Silicone. Selection Code is: PPNN045AA10S | ||||
| EN-222 three locking ears /Fin | Other-XX | |||||
“Quality initial, Honesty as base, Sincere support and mutual profit” is our idea, so as to build repeatedly and pursue the excellence for Factory Supply TS Double Layer Nylon66 Membrane Pleated Filter Cartridge for Pharmaceutical, We hope to establish far more organization associations with consumers all over the globe.
Factory Supply TS high quality Nylon Pleated Filter Cartridge, Our products have enjoyed a great reputation for their good quality, competitive prices and prompt shipment in international market. Presently, we are sincerely looking forward to cooperating with more overseas customers based on mutual benefits.
