Factory Outlets China PVDF Membrane Pleated Filter Cartridge Pharmaceutical Water Filtration Cartridge Filters 0.22 Micron 10inch
Our business sticks for the basic principle of “Quality could be the life with the firm, and track record will be the soul of it” for Factory Outlets China PVDF Membrane Pleated Filter Cartridge Pharmaceutical Water Filtration Cartridge Filters 0.22 Micron 10inch, We will do our best to meet or exceed customers’ requirements with quality products, advanced concept, and efficient and timely service. We welcome all customers.
Our business sticks for the basic principle of “Quality could be the life with the firm, and track record will be the soul of it” for TS Made PVDF Membrane Pleated Filter, We warmly welcome your patronage and will serve our clients both at home and abroad with products of superior quality and excellent service geared to the trend of further development as always. We believe you will benefit from our professionalism soon.
◆Hydrophobic PVDF membrane for gas and solvents sterile filtration
◆Absolute rating, filtration effective is ≥99.99%, Minimum micron to 0.01um for Air
◆Wide Chemical compatability, low protein binding
◆100% integrity test
◆Replace Sartorius ,Pall or Millipore Filter is available
•Fermentation air,
•Tank vent;
•Compressed air,
•Sterile filtration of aggressive solvents/gases
Table : Typical water flow rate (10″)
| Materials Of Construction | Filter Media: | Hydrophobic PVDF Membrane | ||||
| Support Layers: | Polypropylene | |||||
| Micron Rating: | 0.1, 0.2, 0.45, 0.65, 1.0, 3.0 um | |||||
| Inner core: | Reinforced Polypropylene | |||||
| Outer Cage, End caps: | Reinforced Polypropylene | |||||
| Seal Method: | Thermal Bonded, No Adhesives | |||||
| O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, Teflon, etc | |||||
| Cartridge Dimensions | Outer Diameter | 69mm(2.75”) | ||||
| Inner Diameter | 33mm(1.30”) | |||||
| Length(based on DOE end caps) | 10″- 254mm, 20″- 508mm, 30″-762 mm, 40″- 1016mm | |||||
| Filtration Area(m2) | 0.65 m2 per 10” | |||||
| Operating conditions | Normal Operating Temperature: | Up to 65℃ (140℉) | ||||
| Max.Operating Temperature.: | 90℃ (194℉) at △P≤1.0 bar (14psi) | |||||
| Max. Differential Pressure | ||||||
| Normal Flow direction: | 4.2 bar (60 psi) at 25℃ (77℉) | |||||
| Reverse flow direction: | 2.1 bar (30psi) at 25℃ (77℉). | |||||
| PH Value compatibility: | 1-13 | |||||
| Sterilization: | Steam Sterilization for 30 minutes at 135℃(275℉) Cumulative Time: 50hours |
|||||
| Cartridge Safety | Endotoxin: | ＜0.25 EU/ml | ||||
| Extractables: | 0.03g / 10″ | |||||
| GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
| P-PHARMACEUTICAL | DPV | 020-0.2um | AA- DOE | 10-10″ | S-silicone; N-nitrile | |
| F-FOOD & BEVERAGE | 045-0.45um | CN-226/FIN | 20-20″ | E-epdm ; T-teflon (encaptulated) | ||
| H-Chemical | 100-1.0um | BN-222/FIN | 30-30″ | V-viton | ||
| BF-222/ FLAT SEAL | 40-40″ | How to Order?- Example | ||||
| CF-226/FLAT SEAL | 05-5″ | Pharmaceutical grade; Micron:0.45um; Length:10″ ADAPTER: DOE; Gakset: Silicone. Selection Code is: PDPV045AA10S | ||||
| EN-222 three locking ears /Fin | Other-XX | |||||
Our business sticks for the basic principle of “Quality could be the life with the firm, and track record will be the soul of it” for Factory Outlets China PVDF Membrane Pleated Filter Cartridge Pharmaceutical Water Filtration Cartridge Filters 0.22 Micron 10inch, We will do our best to meet or exceed customers’ requirements with quality products, advanced concept, and efficient and timely service. We welcome all customers.
TS Made PVDF Membrane Pleated Filter, We warmly welcome your patronage and will serve our clients both at home and abroad with products of superior quality and excellent service geared to the trend of further development as always. We believe you will benefit from our professionalism soon.
